I have a recently setup Cisco Prime solution running in our test lab with a view to managing various wireless lan controllers and associated AP's. As part of the device management process we are using SNMPv3 but do not want to allow the PRIME v1.2 appliance to use HTTPS or SSH for management. So left this config empty when setting up the device telnet/SSH and HTTP fields when adding our WLC within the device centre.
We now get the following alarm regularly....Is there any way of avoiding this and disabling the telnet/SSH/HTTP options or is it a MUST DO thing?
User 'nouser' with IP Address '10.172.198.19' has made too many unsuccessful login attempts.
This document gives several answers on frequently asked questions for PFRv3 channel state behavior.
Q1: What are all the channel operational states from a BR (border role) perspective and what are the rules/conditions to be in each st...
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...