As this data is collected during Data collection, sometime one failing device for DC may report incorrect descrepancy. Please run a new Data Collection for all devices or you can open Topology Map from where you can right click on affected devices and run DC directly.
You may acknowledge the Descrepancy and run new DC and see if it re-occurs. Ideally this doesnt seems to be an issue now as the revision numbers are same on all the devices.
Vinod **Rating Encourages contributors, and its really free. **
**Rating Encourages contributors, and its really free. **
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...