Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CISCO UCS 5100 CHASSIS (FSM FAULT F999448)

Here are the details of the critical error:

 

Cisco UCS 5108 Chassis: Serial # ............ Sys/chassis-2/locator-led

Description: [FSM:FAILED]: set locator led to inactive (FSM:sam:dme:EquipmentLocatorLedSetLocatorLed).

Remote-Invocation-Error:

Cause: fsm-failed

Code: 999448

Severity: critical

 

The Chassis equipment (blade servers, LED locator light, IO modules, and power supplies) are fully operational.

Any suggestions?

Thank you.

3 REPLIES
Silver

http://www.cisco.com/c/en/us

http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ts/faults/reference/ErrMess/UCS_FSMs.html

   - Lookup the particular fault code in this document using find in your browser

M.

New Member

Thank you for your response

Thank you for your response Marce1000

The FSM Fault Code is F999448.

v/r;

Ned

New Member

If yours is the same issue,

If yours is the same issue, according to

Critical fault on FSM when Chassis Locator LED set

https://bst.cloudapps.cisco.com/bugsearch/bug/CSCux19514

Workaround:


Toggle the LED On and then Off.
If toggling the LED does not clear fault, reset the IOM connected to the current subordinate Fabric Interconnect in the affected Chassis and toggle the LED which should clear the fault.

Or upgrade to 2.2(7b) or newer

151
Views
0
Helpful
3
Replies
CreatePlease to create content