It has to run on a dedicated server with the minimum specs as listed in the data sheet. You can download CUOM and install it with the evaluation license that is valid for 90 days if you want to try it out. If you would like to download it then please click the "Download Software" link at the above link and get CUOM 2.0.3 which is the latest version right now. There is also a Service Pack 1 to install afterwards.
Cisco Unified Service Monitor (CUSM) comes bundled with CUOM. When you install CUOM it will also install CUSM. When you choose the evaluation option in the installer you will have a valid evaluation license for 90 days. That way you can try both CUOM and CUSM. CUOM and CUSM can only coexist on the same server if there are less than 5000 phones. Refer to the data sheet for all the specifics.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...