First, validate that you have correct SNMP credentials for these devices in DCR. You can test these credentials using RME's Device Credential Verification feature under RME > Devices > Device Management. Also, check the device configurations to make sure you are allowed to poll the device with SNMP from the CiscoWorks server.
Next, check to make sure you have the Rtr2800, Rtr2600, Rtr3800, Rtr3600, ASA, and Pix CiscoView packages loaded. What versions of each do you have?
The SNMP credential problem would definitely affect Campus Manager as well, but Campus Manager does not support the PIX and ASA devices.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.