Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco WLC AP count over SNMP

Hi,

Is it possible to monitore a quantity of AP on Cisco WLC and quantity of wireless clients?

I was found only list of AP names over snmp...

Thanks in advance

4 REPLIES
New Member

Re: Cisco WLC AP count over SNMP

If someone has become interested, I have found only one way.

I have created a power shell script that collect all AP names (1 line in text document by 1 name) and then use wc -l to calculate number of lines.

This script provide me really value of number of AP's. And then, I use this result in our monitoring system to get the graphs.

Script is on linux server machine.

New Member

Cisco WLC AP count over SNMP

Hi Andrey,

i was just looking for a similar solution.... Are you willing to share the script with us?

Greetings Ralf

New Member

Re: Cisco WLC AP count over SNMP

Hi, Ralf

If not late

I use script directly in monitoring system

main ()

{

VALUE=`snmpwalk -v 2c -c xxxCommunityxxx X.X.X.X 1.3.6.1.4.1.9.9.513.1.1.1.1.2 | wc -l`

echo "Message: Warning! Number of registed APs decriased."

echo "Data:Count"

echo "Count\t$VALUE"

exit 0

}

main $*

This is shell. but you can use simple only one line

`snmpwalk -v 2c -c xxxCommunityxxx X.X.X.X 1.3.6.1.4.1.9.9.513.1.1.1.1.2 | wc -l`

(from linux)

New Member

Re: Cisco WLC AP count over SNMP

For those reading later.
the MIB/OID to read out the number of AP is
1.3.6.1.4.1.9.9.618.1.8.4.0
And the number of clients is
1.3.6.1.4.1.9.9.618.1.8.12.0

Hope this helps someone.

Sent from Cisco Technical Support iPad App

4367
Views
5
Helpful
4
Replies