01-18-2012 11:31 PM
Hi,
Is it possible to monitore a quantity of AP on Cisco WLC and quantity of wireless clients?
I was found only list of AP names over snmp...
Thanks in advance
01-26-2012 03:56 AM
If someone has become interested, I have found only one way.
I have created a power shell script that collect all AP names (1 line in text document by 1 name) and then use wc -l to calculate number of lines.
This script provide me really value of number of AP's. And then, I use this result in our monitoring system to get the graphs.
Script is on linux server machine.
02-02-2012 08:02 AM
Hi Andrey,
i was just looking for a similar solution.... Are you willing to share the script with us?
Greetings Ralf
03-20-2012 12:04 AM
Hi, Ralf
If not late
I use script directly in monitoring system
main ()
{
VALUE=`snmpwalk -v 2c -c xxxCommunityxxx X.X.X.X 1.3.6.1.4.1.9.9.513.1.1.1.1.2 | wc -l`
echo "Message: Warning! Number of registed APs decriased."
echo "Data:Count"
echo "Count\t$VALUE"
exit 0
}
main $*
This is shell. but you can use simple only one line
`snmpwalk -v 2c -c xxxCommunityxxx X.X.X.X 1.3.6.1.4.1.9.9.513.1.1.1.1.2 | wc -l`
(from linux)
08-23-2013 07:49 AM
For those reading later.
the MIB/OID to read out the number of AP is
1.3.6.1.4.1.9.9.618.1.8.4.0
And the number of clients is
1.3.6.1.4.1.9.9.618.1.8.12.0
Hope this helps someone.
Sent from Cisco Technical Support iPad App
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: