Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco Works and PIX

Cisco Works is constantly logging into my PIX 515 and issueing a no pager line command? I am running RME 4.0.5. Any thoughts?

Cisco Employee

Re: Cisco Works and PIX

This is not due to something in LMS that, but a change in PIX OS code. In PIX 6.x code we didn't need to enter global config mode to archive PIX configs, but this

has changed in PIX 7.x code.

It is now required due to PIX OS 7.x to enter global config mode and

enter "no pager". Before we had to support that version of code, we

never went in to config t to issue the no pager command. Now, the OS

requires it. Since we explicitly changed our code for this and

enhancement to LMS will not help. And the PIX does not support the

CONFIG-COPY-MIB, so we have to go interactive to get the config.

New Member

Re: Cisco Works and PIX

Thanks David - I am wondering why I could not get that information from TAC support. My company spends $200000 a year for TAC support and I get 10 minute response from NetPro when my tac case which has been opened for 5 days now is still be reviewed by some guy in TAC who really does not get it. Frustrated with Cisco TAC

Cisco Employee

Re: Cisco Works and PIX

In addition to Dave's comments, there is a bug on this, CSCsi07492. A workaround is available by calling the TAC and referencing this bug ID, and this will be resolved in LMS 3.0.