Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco Works Campus User Tracking not display IP address

We are using Cisco Works for managing all Cisco Device.

Cisco work Campus Manager >> Endhost Entry Display Mac-address only not showing IP address.

So we are test on Switch (2960 IOS Ver 12.2(25r)SEE1)

Show ip arp

but it is show only native (vlan1) entry only but  Access port ARP entry not Display.

for referance sh run, sh vlan and sh ip arp command o/p are attached .

pls help if i am in wron direction .

Mayur

2 REPLIES
Cisco Employee

Re: Cisco Works Campus User Tracking not display IP address

The switch does not have an IP address ins VLAN 3, thus it will not have any ARP entries for VLAN 3.  In order for User Tracking to show IP addresses for MAC addresses in VLAN 3, then you need to make sure at least one router with an interface in VLAN 3 is managed by Campus Manager.

New Member

Re: Cisco Works Campus User Tracking not display IP address

lost of  Thanks

for helping

Mayur

413
Views
0
Helpful
2
Replies