Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco Works Detailed Device Report: Bug for 10GB Interfaces - wrong ifSpeed

Cisco Works (3.0: )The Detailed Device Report shows wrong ifSpeed results for 10GB Interfaces. (4.294.967.296 instead of 10.000.000.000)

It's clearly because CW-RME uses the ifSpeed 32Bit-OID instead of 64Bit ifHighSpeed-OIDs. Via snmpget I can see the right ifHighSpeed-results:

(OID=.1.3.6.1.2.1.31.1.1.1.15.4)

Example:

IF-MIB::ifName.4 = STRING: Te1/4

32Bit OID (wrong):

IF-MIB::ifSpeed.4 = Gauge32: 4294967295

64Bit OID (correct MBit/s):

IF-MIB::ifHighSpeed.4 = Gauge32: 10000

The RME-manual tells us, that only "ifSpeed" is used in the Inventory-Schema (IfEntry). Isn't it?

What about the 64Bit-ifHighSpeed OID?

Will there be any bugfix for that?

2 REPLIES
Cisco Employee

Re: Cisco Works Detailed Device Report: Bug for 10GB Interfaces

You're absolutely right about everything here. Unfortunately, there is no bug for this yet. I will go ahead and file one, and post the ID.

Cisco Employee

Re: Cisco Works Detailed Device Report: Bug for 10GB Interfaces

I have filed CSCsm79917 to track this issue.

711
Views
0
Helpful
2
Replies