Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Cisco works LMS 3.0

Hi

Can anybody help me with the deployment guide for the below scenario.

The Cisco works LMS 3.0 version is used and its license details are 100 device restricted license version K9. The Cisco Works LMS 3.0 has been installed in the Windows 2003 standard edition server.

Now I need to prepare a deployment guide for the following devices to be enrolled.

1. Router

2. Switch

3. Firewall

Please help me on this...

Let me know if you need additional info

1 REPLY
Silver

Re: Cisco works LMS 3.0

No problem!

1.Configure Read/Write and read only SNMP community strings on all of your devices.

2. Create a user name and password with level 15 privledges in either your AAA server or all of your devices and limit its sessions to originate from only your Ciscoworks server.

3. Create or allow ACLs on each device so that information from each device can reach the ciscoworks server. The specific ports are listed at the begining of the installation guide.

4. Configure the default credentials on your Ciscoworks server to match #1 and #2.

5. Enter in the devices into Common Services.

6. I would suggest that you enable automanage devices from the DCR in all of your applications.

105
Views
0
Helpful
1
Replies
CreatePlease to create content