Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco Works LMS Demo Doesn't WORK

After the installation the Apache web server does not start.

After running a resetcasuser.exe and recreating the server certificates, Apache is still down.

pdshow:

Process= Tomcat

State = Program started - No mgt msgs received

Pid = 3144

RC = 0

Signo = 0

Start = 5/19/2009 1:36:33 PM

Stop = Not applicable

Core = Not applicable

Info = Application started by administrator request.

Process= TomcatMonitor

State = Running normally

Pid = 3604

RC = 0

Signo = 0

Start = 5/19/2009 1:36:37 PM

Stop = Not applicable

Core = Not applicable

Info = Tomcat Server up

Process= Apache

State = Never started

Pid = 0

RC = 0

Signo = 0

Start = N/A

Stop = Not applicable

Core = Not applicable

Info = Not applicable,

C:\PROGRA~1\CSCOpx\MDC\Apache>Apache.exe -t -d .

c:/program files/cscopx/mdc/apache/conf/httpd.conf: Syntax OK

Most of the Apache logs are empty and the error.log shows these errors:

[Tue May 19 13:38:07 2009] [crit] (2)No such file or directory: make_sock: could not bind to port 443

[Tue May 19 13:48:52 2009] [crit] (2)No such file or directory: make_sock: could not bind to port 443

[Tue May 19 13:57:09 2009] [crit] (2)No such file or directory: make_sock: could not bind to port 443

[Tue May 19 14:05:30 2009] [crit] (2)No such file or directory: make_sock: could not bind to port 443

[Tue May 19 14:11:45 2009] [crit] (2)No such file or directory: make_sock: could not bind to port 443

[Tue May 19 15:15:26 2009] [crit] (2)No such file or directory: make_sock: could not bind to port 443

[Tue May 19 15:30:23 2009] [crit] (2)No such file or directory: make_sock: could not bind to port 443

[Tue May 19 15:41:45 2009] [crit] (2)No such file or directory: make_sock: could not bind to port 443

The server services set to automatic are the daemon manager and CWCS rsh/rcp service :Auto

CWCS syslog service :Auto

CWCS tftp service :Auto the rest are set to manual.

The installation logs do not show any errors.

Please advise as soon as possible.

Thanks.

1 REPLY
Cisco Employee

Re: Cisco Works LMS Demo Doesn't WORK

You have another service (most likely IIS) bound to TCP port 443. If you do not need that other service, disable it. If you need to leave it enabled, you can change the LMS SSL port number using the command NMSROOT\MDC\Apache\changeport.exe PORT -s. for example:

changeport 1755 -s

203
Views
0
Helpful
1
Replies
CreatePlease to create content