12-29-2008 03:15 AM
Hi,
I am trying to add devices (1 4506E and 2960G)to RME in CWSNMS both through the Admin->Essentials->Inventory->Add Devices and by adding it to Whats Up Gold and then exporting it to Essentials. But both the time I can see the devices in the inventory but then never appear under Essentials tab. Now according to the link http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_small_network_management_solution/1.5/device_support/table/snms1_5.html
2960 is not supported by CWSNMS. But 4506 is supported with supIV. I have 4506-E with supIV.
Should CWSNMS 1.5 support 4506-E with SUP-IV?
Solved! Go to Solution.
12-29-2008 10:04 AM
No. The 4506-E is a newer device with a different sysObjectID from the 4506.
4506 : 1.3.6.1.4.1.9.1.502
4506-E : 1.3.6.1.4.1.9.1.875
12-29-2008 10:04 AM
No. The 4506-E is a newer device with a different sysObjectID from the 4506.
4506 : 1.3.6.1.4.1.9.1.502
4506-E : 1.3.6.1.4.1.9.1.875
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide