FWSM, ASA, and PIX devices are not supported by Campus Manager since they do not support CDP. Therefore, UT will not be able to use them as routers to get ARP data. What I have done in my lab to get around this is to put a router on the same subnet as the firewall, and point my devices to the router as the default gateway. The router learns the ARPs, then redirects the host to the firewall for the real routing.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...