Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco3020 IOS upgrade failure

I ran "distribut image" job for C-Class blade, RME was able to copy the image but failed to reboot the devices with the following error:

Device will be rebooted.

SWIM5006: Device Reboot operation failed.

The device is not configured for reboot. The SNMP Write Community string might be wrong.

The command SNMP server system shutdown should be in the running configuration on the device."

I verified the community string read/write and both are correct and CDA show OK. Do you know if I'm missing anything else?

Thanks.

1 REPLY
Cisco Employee

Re: Cisco3020 IOS upgrade failure

You need to have the following command configured on the device:

snmp-server system-shutdown

286
Views
0
Helpful
1
Replies