in CiscoView the interfaces of a 2960 switch are incorrectly represented. The first two interfaces should be fa0/1 and fa0/2 but prove to be gi0/1 and g0/2. All other interfaces are shifted two posititions to the right. The interfaces on 2950 switches in CiscoView are depicted correctly.
CiscoWorks Lms: 3.1
2960 DevPack: 5.0
2960 Ios: 12.2(25)SEE LanBase
Removal and reinstall of 2960 device package dit not solve the problem.
I based this conclusion on two observations. Fistly when I try to configure the top left port I get the output pictured in the first attachment. Secondly the interface status of the switch does not correspond to the CiscoView representation which you can see in the second attachment.
I have a feeling this has to do with the fact that your gig ports are connected. I don't have any 2960s with the gig ports connected, so I suggest you open a TAC service request so more analysis can be done.
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...