Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

CiscoView 5.5 not showing all switches in a stack

Hi,

I am running LMS 2.2 with all SP and IDUs CV5.5 is running the lasest device packages, how ever when viewing a 3750 stack with 3 switches only 2 are showing up. We also have a stack of 2 that is only showing 1 switch.

Any Ideas?

Alex.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: CiscoView 5.5 not showing all switches in a stack

Sorry, thought 5.1 was on CCO

It looks like you're running into CSCsb83640 where pkg v5.0 doesn't recognize the 3750's running newer versions of code

This is actually resolved in pkg 5.1 which should be released soon

3 REPLIES
Cisco Employee

Re: CiscoView 5.5 not showing all switches in a stack

The latest package for CiscoView should correct this problem. What version of the cview package for the 3750's are you running? Also, what version of code on the 3750s?

Community Member

Re: CiscoView 5.5 not showing all switches in a stack

the package we are running is Cat3750.cv50.v6-0.zip, this is the latest one on CCO. All the stacks are running c3750-ipbase-mz.122-25.SEB2.

Cisco Employee

Re: CiscoView 5.5 not showing all switches in a stack

Sorry, thought 5.1 was on CCO

It looks like you're running into CSCsb83640 where pkg v5.0 doesn't recognize the 3750's running newer versions of code

This is actually resolved in pkg 5.1 which should be released soon

123
Views
5
Helpful
3
Replies
CreatePlease to create content