Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Ciscoview supported modules help.

Hi all

the page bellow where shows the supported devices is not working and i need to know if the WS-X4612-SFP-E is supported at the Ciscoworks 4.1

http://www.cisco.com/pcgi-bin/Software/CiscoView/cvplanner.cgi

Ps - i am using Ciscoworks 4.1 and i am using the defult ciscoview version.

Thanks.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: Ciscoview supported modules help.

If you do a device update to your LMS software (to the current version 24.0 for Cat 4000), you will have support for those modules. Admin > System > Software Center > Device Update is the menu path to do that.

Here is a link to the readme for 24.0. It states, in part:

1/24/2012

Cisco Cat4000 Family Switches running IOS, Incremental Installation Release 24.0

Supported for:

* CiscoView 6.1.6 and above for CiscoWorks 



WHAT IS NEW?
============
 
This Cat4000IOS(24.0) release provides support for the following devices and modules:
* WS-C4928-10GE
* WS-X4712-SFP+E
* WS-X4612-SFP-E
* WS-X45-SUP7L-E
* WS-X4748-UPOE+E
* WS-X4748-RJ45-E
2 REPLIES
Hall of Fame Super Silver

Re: Ciscoview supported modules help.

If you do a device update to your LMS software (to the current version 24.0 for Cat 4000), you will have support for those modules. Admin > System > Software Center > Device Update is the menu path to do that.

Here is a link to the readme for 24.0. It states, in part:

1/24/2012

Cisco Cat4000 Family Switches running IOS, Incremental Installation Release 24.0

Supported for:

* CiscoView 6.1.6 and above for CiscoWorks 



WHAT IS NEW?
============
 
This Cat4000IOS(24.0) release provides support for the following devices and modules:
* WS-C4928-10GE
* WS-X4712-SFP+E
* WS-X4612-SFP-E
* WS-X45-SUP7L-E
* WS-X4748-UPOE+E
* WS-X4748-RJ45-E
New Member

Ciscoview supported modules help.

Marvin,

Thanks again.

I installed the cv pack and everything is working fine.

329
Views
0
Helpful
2
Replies
CreatePlease login to create content