What version of RME is this and what device type (sysObjectID)?
This error has been seen a few times when the service pack does not support the hardware you are trying to fetch the config for.
thanks Davistan, what can get is
we are using LMS2.6 and i am using 6506 swtich with 8.4 2a,
pls help if how to get sysobjectid if you require
You'll need to do an snmpget/walk on the switch to get the sysObjectID. Is this a 6506 or something like 6506-E?
Also, still need your version of RME
Hardware Version: 3.0 Model: WS-C6506
Version & Patch Level:
4.0.6 -RME version.
Please let me know if your require more info thanks again
This isn't the sysObjectID of the device, this is just the numerical OID for the object itself.
You'll want to go to Device Troubleshooting - Device Center and then select the device and when the main frame loads select snmpwalk. Then enter either 22.214.171.124.126.96.36.199 or sysObjectID as the object you want to walk. What is the result?
This is a 6506-E which is supported in your version
Is there a FWSM in this switch?
You might want to enable debugs for ArchiveMgmt in under RME - Admin - System Preferences - Loglevel Settings and then try a sync archive on the switch.
Also, enable a packet capture at the same time
i will do that but does it slow the device ?
if yes then i might need to run in night i.e. 12hrs from now
and what this result will give info?
thanks a lot. i have started the archive mgmt job now. job completed wher cani get output which you required
Don't forget about the packet capture which you'll want to look at as well.
the debug output will be in te dcmaservice.log
i am extremely sorry for troublehsoot this again as i went on leave, but i would lik this to be continue from tomorrow morning
if possible thank you.
You have not included the entire logs for which Dave asked. There is nothing we can get from these fragments.
Please provide the list of contents in NMSROOT/MDC/tomcat/webapps/rme/WEB-INF/lib/pkgs and NMSROOT/classpath/com/cisco/nm/xms/psu/pkgs/rme.
Your lib/pkgs directory is missing the Cat6000.zip package. This package is critical for config archive to work on this 6506. You can copy this file from the pkgs/rme directory, then restart dmgtd, and the config archive problem should be fixed.
Oh WOW, thats great news for me, i should be doing right away and will share the result with you. thanks a bunch dude.
One last query on this Dude, wher can i get or download WAAS package to addit in Pkgs folder. thanks again.
There is no WAAS package. The WAE 512 models are supported now in LMS 3.0.1 in the content engine packages. The other models like the 612 and NME will not be supported until next year. There is no support in LMS 2.6.