I thought it should be released middle of next year (2007). The last version of NNM I saw was 7.5.1 and there are integration modules to integrate LMS to NNM and also NNM to LMS(the later is not more than a link in the LMS GUI)
the Integration Utility (LMS into NNM) is provided with CDone or you can download it on CCO:
I want to be sure that HPOV NNM 6.31 works with RME 3.5. I know that integration utility 1.6 from cisco does not support HPOV NNM6.31 but hp have integration utilities and have support for that version.
I want to know if this integration works. The integration can be done from one side right?
for nnm6.31 an LMS 2.x (RME 3.x) it was version 1.5 of the integ Util to use.
But any integration I made needed some manual doing afterwards.
- rightMouse popup fort RME and CiscoView never worked because the selection criteria was not given in the according file.
-I always had to re-add telnet to the rightMouse menu for all nodes - it has disappeared after integration.
If you use the tool you should also use one of the latest nmidb file from cisco. You have the option to download it on the CiscoView device package download side (on CCO - login reqquuired) along with the device package itself.
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...