Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

CiscoWorks and RME

I installed LMS 2.5, with the RME, but not functions SYSLOG. But this collecting LOG's.

Which the solution for this problem?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: CiscoWorks and RME

If SyslogAnalyzer is never started, then you will never get any messages processed. SyslogAnalyzer depends on EssMonitor, RMEDbMonitor, CTMJrmServer, and jrm. Check the status of those processes as one of them must not be running correctly.

10 REPLIES
Cisco Employee

Re: CiscoWorks and RME

Exactly what aspects of syslog are not working? What syslog messages are appearing in the server's syslog file? What are the statuses of the SyslogCollector and SyslogAnalyzer processes?

Community Member

Re: CiscoWorks and RME

When I open the RME and I ask for a report of them you finish 24 hours, appears "No records.".

The statuses of the SyslogCollector is "Program started - No mgt msgs received", and of the SyslogAnalyzer is "Never started ", but I initiated these processes manually, but never they change the status.

Cisco Employee

Re: CiscoWorks and RME

If SyslogAnalyzer is never started, then you will never get any messages processed. SyslogAnalyzer depends on EssMonitor, RMEDbMonitor, CTMJrmServer, and jrm. Check the status of those processes as one of them must not be running correctly.

Community Member

Re: CiscoWorks and RME

They had disappeared "Device Selector", I reboot the server.

Community Member

Re: CiscoWorks and RME

My friends, very thanks

Tt decided my problem, but this occurs again inside of some days. I have that to carry through this process again? This is normal?

Community Member

Re: CiscoWorks and RME

To put the conditions of the processes they are:

SyslogAnalyzer Never started

EssMonitor Running normally

RMEDbMonitor Running normally

CTMJrmServer Never started

jrm Waiting to initialize

SyslogAnalyzer Never started

SyslogCollector Program started - No mgt msgs received

Cisco Employee

Re: CiscoWorks and RME

The root problem is jrm. What platform are you running on, and did you change the server's hostname after installing LMS?

Community Member

Re: CiscoWorks and RME

Hi ms. Jclarke,

This functioning in the Intel platform, and I did not modify no user. When you says hostname of the user, which hostname wants to say?

Community Member

Re: CiscoWorks and RME

I forgot to say in which S.O. this working. In Windows Server 2003 R2

Cisco Employee

Re: CiscoWorks and RME

I didn't say hostname of the user. I asked about hostname of the server. In any event, the jrm.log should have some errors as to why it is not fully initializing.

250
Views
0
Helpful
10
Replies
CreatePlease to create content