Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CiscoWorks archive issue again (LMS2.6

I have created a config archive job which runs twice daily at 7, I get the result in email and it says 9 failed,71 successful and 162 partially successful out of 242.

when I go to RME>config mgmt>archive mgmt> I see out of 242;

successful 65, failed 89 and partially successful is 88. why it is different?

7 REPLIES
Cisco Employee

Re: CiscoWorks archive issue again (LMS2.6

The summary should reflect the latest job results more or less. There may be some stale database records, however. Take the results from the job, and the summary info, and find a device that that is successful in the job, but not listed under Successful in the summary information. Where is the device listed in the Summary information? What other details are associated with that device?

New Member

Re: CiscoWorks archive issue again (LMS2.6

I don't think the summary reflect the latest job result. I took five devices from "failed" status and opened it up in the device center, it shows that device last archived at 7:10PM last night which is correct but the summary status shows it as failed. not sure why. WHat can i do to resolve this?

Cisco Employee

Re: CiscoWorks archive issue again (LMS2.6

Check the box next to the Failed devices in the summary, and perform a sync from there. What does that do to the total count?

New Member

Re: CiscoWorks archive issue again (LMS2.6

Tried this already but the count doesn't change, still shows same count for successful, failed and partially failed.

Cisco Employee

Re: CiscoWorks archive issue again (LMS2.6

Enable ArchiveMgmt Service and ConfigJob debugging under RME > Admin > System Preferences > Loglevel Settings, then perform a sync job against ONE device that shows up as failed in the summary. Post the dcmaservice.log and the log from the job directory.

New Member

Re: CiscoWorks archive issue again (LMS2.6

Here is the output you requested.

Thanks Joe.

Cisco Employee

Re: CiscoWorks archive issue again (LMS2.6

This device, 10.21.205.12, failed. If it was reported as Failed in the summary, then the summary is correct for this device.

131
Views
5
Helpful
7
Replies