Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Ciscoworks can it do Port mapping on 6000 switch?

Can ciscoworks map ports on a switch, or do anything like that?

Is there an easy way to map devices on a switch with 96 or more ports?

3 REPLIES
Cisco Employee

Re: Ciscoworks can it do Port mapping on 6000 switch?

What do you mean by map? CiscoWorks LAN Management Solution has the ability to display a graphical representation of a switch showing all ports (CiscoView). This tool allows one to change port attributes like speed, duplex, VLAN, etc. There are also more large-scale tools to do port-based configuration across many ports at once.

LMS also offers a layer 2 topology map which shows a CDP/ILMI based view of the network. From that map you can drill into a switch, and bring up the same CiscoView display. You can also do VLAN port assignments on a large number of ports from this same mapping tool.

New Member

Re: Ciscoworks can it do Port mapping on 6000 switch?

What I mean by map as in a switchport mapper.

Map hardware addresses to IP Addresses.

So you can document what device is on which port easily.

Can this be done in CiscoWorks?

Cisco Employee

Re: Ciscoworks can it do Port mapping on 6000 switch?

Absolutely. This is the main function of the User Tracking application within CiscoWorks Campus Manager.

243
Views
0
Helpful
3
Replies
CreatePlease to create content