CiscoWorks device discovery with Multiple SNMP commu.
Our network is configured with multiple SNMP read community strings for security reasons, the problem is that CiscoWorks is not being able to discover all devices. It discovers only those with the same SNMP community to which it is attached? Does the fact that we're using L3 to the edges have anything to do with that?
I have enabled multiple community string in the SNMP settings and the "Jump router Boundaries" in the discovery settings.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...