Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ciscoworks device management

We run LMS 2.6 on Solaris 8

Recently we purchased the C3560 8 port switch from Cisco. When I look in device type groups, only the 24p version is available, even after doing a device update only the 24p version is available, the 8p version is classified under "Unknown". Is there a package for this type of switch ? (or an other solution).

Many thanks,

Lieven Stubbe

Belgian Railways

7 REPLIES
Cisco Employee

Re: ciscoworks device management

What is the sysObjectID of this switch? You can obtain that by using the SNMP Walk tool from Device Center > Tools > SNMP Walk, and walking the switch with the starting OID of "sysObjectID".

New Member

Re: ciscoworks device management

The ID is iso.org.dot.internet.private.enterprises.cisco.CiscoProducts.797

Many thanks,

Lieven Stubbe

Cisco Employee

Re: ciscoworks device management

This switch is supported in version 4.2 of the Cat3560 package. You should be able to download this package update via Common Services > Software Center > Device Update.

The switch is also supported in Campus Manager 4.0.11, DFM 2.0.11, and Common Services MDF 1.23.

New Member

Re: ciscoworks device management

Many thanks for the quick reply, but I already did a package update, and the version of the 3560 package remains 4.0, is there a way to download this somewhere ?

Many thanks,

Lieven Stubbe

Cisco Employee

Re: ciscoworks device management

You need to upgrade to RME 4.0.6 using Software Update first.

New Member

Re: ciscoworks device management

Hello,

We upgraded RME from 4.0.5 to 4.0.6, after that

we did a device upgrade. nevertheless, the 3560 8p switches remain in the section unknown, the version of the package is 4.2

What is going wrong ? I can add them manually, the OID is present, normally does CW add the devices automatically to a specific group ?

Many thanks,

Lieven Stubbe

Belgian Railways

New Member

Re: ciscoworks device management

After deleting & rediscovering everything ok

Sorry for the trouble

153
Views
0
Helpful
7
Replies