Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Ciscoworks Fails to Manage ASA5550-Ver 8.3(1) via SNMPv3

Hello Everyone, I have been trying to configure SNMPv3 on an ASA 5550 with the following but it continue to fail..Need some Help.

Config:

snmp-server group groupv3 v3 priv
snmp-server user userid groupv3 v3 auth md5 password2 priv aes 192 password3

ssh 10.10.10.1 255.255.255.255 inside

Ciscoworks snmp Management to device

Read Username:
userid
Read Auth Password:
password2
Read Auth Protocol:
Read Privacy Password:
password3
Read Privacy Protocol:
Write Username:
userid
Write Auth Password:
password2
Write Auth Protocol:
Write Privacy Password:
password3
Write Privacy Protocol:
Timeout (in seconds):

Test Results

SNMPRv3(Read) Failed
   Sent:5 recvd:0 min:14 max:14 avg:14 timeout:2 min_size: 1472 protocol: snmpv3_get port: 0

SNMPWv3(Write) Failed
   Sent:5 recvd:0 min:0 max:2 avg:2 timeout:2 min_size: 1472 protocol: snmpv3_set port: 0

2 REPLIES

Re: Ciscoworks Fails to Manage ASA5550-Ver 8.3(1) via SNMPv3

From the screen shot below, i do not see any option selected for Read Auth Protocol and Read Privacy protocol.  Have you checked that? or did screenshot not paste properly with the options ....

you can also check if the passwords are 8 Characters or more.

or try polling with Net-snmp to eliminate application issues.

you can turn on Debug snmp packets and poll the box to see what really is happening.

New Member

Re: Ciscoworks Fails to Manage ASA5550-Ver 8.3(1) via SNMPv3

Yeah the protocol did not get copied, But I will attempt your suggestion and post the outcome asap.

Thanks

517
Views
0
Helpful
2
Replies