CiscoWorks IPM - collectors stuck in pending state
I have IPM 2.6 running on ciscoworks, the first collector i created as a test worked perfectly and started running immediately. Now when i've come to start the project proper to configure 400 collectors only 4 collectors show up. Cisco's recommended collectors per ipm server is 1000 so i'm well within the figure.
I even left it overnight thinking it might be database synching issues. Still can't find all the collectors, worst of all when i try to create new collectors it sees them as duplicates.
The source device is reachable and the ipm process is running, any pointers please?
This document gives several answers on frequently asked questions for PFRv3 channel state behavior.
Q1: What are all the channel operational states from a BR (border role) perspective and what are the rules/conditions to be in each st...
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...