Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Ciscoworks LMS 3.0.1 virtualization

The server will be virtualized with the same features:

RAM: 4Gb

Processor: Intel Xeon 3.2 Ghz

HD: 140 Gb

I need to know if no problem with this kind of implementation.

Best regards,

thanks very much!

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: Ciscoworks LMS 3.0.1 virtualization

Virtualized OS support was not introduced until LMS 3.1. See http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.1/install/guide/prereq.html#wp1099303 for details.

Prior to LMS 3.1, you were limited to Windows Server Terminal Server installations for a "virtual" server.

If you are going to upgrade your LMS, also note that the latest release is LMS 3.2. Its relevant release notes section is here: http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/prereq.html#wp1103497

LMS 3.2 added Hyper-V in addition to VMWare as a supported virtualization environment.

1 REPLY
Hall of Fame Super Silver

Re: Ciscoworks LMS 3.0.1 virtualization

Virtualized OS support was not introduced until LMS 3.1. See http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.1/install/guide/prereq.html#wp1099303 for details.

Prior to LMS 3.1, you were limited to Windows Server Terminal Server installations for a "virtual" server.

If you are going to upgrade your LMS, also note that the latest release is LMS 3.2. Its relevant release notes section is here: http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/prereq.html#wp1103497

LMS 3.2 added Hyper-V in addition to VMWare as a supported virtualization environment.

245
Views
0
Helpful
1
Replies