Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Ciscoworks LMS 3.2 Web Server won't start after reboot

Hi,

I restarted Ciscoworks as I had a problem with inventory collection (and normally needs a reboot every 2-3 weeks).

 

Since the restart, I am unable to browse to the Ciscoworks application. from the DCRlog, it looks like it is taking some time to load the internal DCR server or isn't going to! 

I tried starting the Apache service manually, but got a 193 error code.

Any help appreciated! I attach a pdshow output and last few lines of dcrlog..

[ Thu Jul 24 10:38:00 BST 2014 ] Starting DCR Server...
[ Thu Jul 24 10:38:19 BST 2014 ] No restore has happened
[ Thu Jul 24 10:38:31 BST 2014 ] Starting "InternalDCR" server...
[ Thu Jul 24 10:38:31 BST 2014 ] Starting "DCR" **North-bound server**...
[ Thu Jul 24 10:38:31 BST 2014 ] Starting "LocalDCR" **LOCAL server** ...
[ Thu Jul 24 10:38:32 BST 2014 ] Starting "LocalDCR" **EventListenerDCR server** ...
[ Thu Jul 24 10:38:33 BST 2014 ] DCR Server started successfully.
[ Mon Sep 01 12:23:56 BST 2014 ] DCRServer stopped upon request
[ Mon Sep 01 13:00:56 BST 2014 ] Starting DCR Server...
[ Mon Sep 01 13:01:16 BST 2014 ] No restore has happened
[ Mon Sep 01 13:52:49 BST 2014 ] Starting DCR Server...
[ Mon Sep 01 13:53:12 BST 2014 ] No restore has happened

 

 

 

Everyone's tags (1)
1 REPLY
Cisco Employee

Hi ,follow the below steps::1

Hi ,

follow the below steps::

1. reset the casuser:

NMSROOT/CSCOpx/setup/support > resetCasuser.exe

 

2.regenerate the SSL certificate :


1)       Stop the daemons manager from CLI using
/etc/init.d/dmgtd stop (solaris)
or
net stop crmdmgtd (windows)

2)       Backup the following files found in NMSROOT/CSCOpx/MDC/Apache/conf/ssl and
then delete:
server.crt
server.csr
server.key
server.pk8

Under CLI go to "NMSROOT\CSCOpx\MDC\Apache\" and then run ConfigSSL.pl by typed the following
command on CLI.

CSCOpx\MDC\Apache\perl configssl.pl -disable
CSCOpx\MDC\Apache\perl configssl.pl -enable


Then fill the certificate accordingly and restart daemons from CLI using net


start the daemon manager:
/etc/init.d/dmgtd stop (solaris)
net start crmdmgtd (windows)

 

If above does not help then check the below things:

Make sure files

/opt/CSCOpx/MDC/tomcat/shared/lib/ctm_config.txt and

/opt/CSCOpx/MDC/tomcat/webapps/cwhp/WEB-INF/lib/ctm_config.txt has proper content.

File should not be empty. Check any working server (If any available or just send me these files)  for the content, copy and replace
=================

 

Thanks-

Afroz

***Ratings Encourages Contributors ****

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****
124
Views
0
Helpful
1
Replies