Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ciscoworks LMS bundle 2.5 bulk import

hi,

Can anyone help me how to do bulk import of all network switches and routers in ciscoworks LMS bundle 2.5.

I have hostname , management IP address and SNMP RO. I need sample CVS or xml file to do bulk import with only hostname and management IP address.

Can anyone pls help me

siva

5 REPLIES
Silver

Re: ciscoworks LMS bundle 2.5 bulk import

Hi Siva,

for device and Credentials a CSV files has the following format:

; This file is generated by DCR Export utility

Cisco Systems NM Data import, Source=DCR Export; Type=DCRCSV; Version=3.0

;

;Start of section 0 - Basic Credentials

;

;HEADER: management_ip_address,host_name,domain_name,device_identity,display_name,sysObjectID,dcr_device_type,mdf_type,snmp_v2_ro_comm_string,snmp_v2_rw_comm_string,snmp_v3_user_id,snmp_v3_password,snmp_v3_engine_id,snmp_v3_auth_algorithm,rxboot_mode_username,rxboot_mode_password,primary_username,primary_password,primary_enable_password,http_username,http_password,http_mode,http_port,https_port,cert_common_name

;

10.20.30.35,tac-wl-se-035,dtntac.local,,tac-wl-se-035,1.3.6.1.4.1.9.1.630,,278325088,public,,,,,,,,,,,,,,,,

To use this devices in RME be sure you have set the options in RME -> Admin -> Device Mgnt. -> Device Management Settings.

Hope that helps.

Best regards,

Frank

New Member

Hello Team, Thank you for

Hello Team,
 
Thank you for your ususal support.
 
Trust my mail meets you well.
 
I kindly need a technical assistance for generating a CSV file or XML file template  that would be used for  bulk import of network devices on CISCO PRIME LMS 4.2.
 
I tried using a CSV file template for importing but i got an error stating invalid template.
 
I also used the XML file template,it was not invalid but the CISCO PRIME LMS 4.2  could not discover any devices.
 
 
Please I do need urgent assistance to generate a CSV file template or XML file template that would be compatible with CISCO PRIME LMS 4.2.
 
Kind Regards,
 
Tioluwani Irabor
 

CSCO11624940.

Cisco Employee

Re: ciscoworks LMS bundle 2.5 bulk import

You can find a sample csv file for import in the online help portion of LMS. You can also add one device manually, then export it to csv to have an actual csv file that you can view and modify. You can then add entries to it and import it again.

New Member

Re: ciscoworks LMS bundle 2.5 bulk import

Hi,

Thanks for the info. I would like to know how to add management subnet range in group so that device will get discovered automatically based on SNMP traps.

siva

Silver

Re: ciscoworks LMS bundle 2.5 bulk import

Hi Siva,

go to Campus Manager start page and follow the links in the 3 steps to enable a initial device search.

For more information have a look here:

http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/cw2000/camp_mgr/camp_4x/cmgr_403/u_guide/index.htm

Then setup the RME.

Have a look on the documents here:

http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/cw2000/cw2000e/e_4_x/4_0_3/u_guide/index.htm

Hope that helps.

Frank

1129
Views
0
Helpful
5
Replies
CreatePlease to create content