Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

CiscoWorks LMS3.0 doesn't know the 2960 PoE type

I have several PoE Catalyst 2960 WS-C2960-24PC-L

When I added them to CiscoWokrs I found out that it doesn't know WS-C2960-24PC-L type.

As a result they are unknown.

The list of installed applications:

1. LMS Portal 1.0.0

2. CiscoWorks Assistant 1.0.0

3. CiscoView 6.1.6

4. CiscoWorks Common Services 3.1.0

5. Integration Utility 1.7.0

6. Resource Manager Essentials 4.1.0

7. Campus Manager 5.0.0

8. Device Fault Manager 3.0.0

9. Internetwork Performance Monitor 4.0.0

How to add WS-C2960-24PC-L to the LMS?

As I understand I have to update Resource Manager Essentials. Which version should I install ?

1 ACCEPTED SOLUTION

Accepted Solutions

Re: CiscoWorks LMS3.0 doesn't know the 2960 PoE type

You need to upgrade to lms 3.0.1 called also 3.0 update december 07

6 REPLIES

Re: CiscoWorks LMS3.0 doesn't know the 2960 PoE type

RME 4.1.1, Campus Manager 5.0.3

Check the doc:

http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/device_support/table/lms32sdt.html

I understand that is for device :

Cisco Catalyst 2960-24PC-L Switch

(WS-C2960-24PC-L)

with sysobject ID :1.3.6.1.4.1.9.1.950

Community Member

Re: CiscoWorks LMS3.0 doesn't know the 2960 PoE type

I checked the doc and I found out that

Cisco Catalyst 2960-24PC-L Switch (WS-C2960-24PC-L)

with sysobject ID :1.3.6.1.4.1.9.1.950

is in section Devices Supported in RME, CM, DFM, and CV (With LMS 3.0 December 2007 Update)

I have LMS3.0. (it's in about section)

are LMS3.0 and LMS 3.0 December 2007 Update different ?

Blue

Re: CiscoWorks LMS3.0 doesn't know the 2960 PoE type

Yes, I think "LMS 3.0 December 2007 Update" would bump the version number to LMS 3.0.1, after which you might still need to get the latest device support packages (Common Services -> Software Center -> Device Update) to get proper WS-C2960-24PC-L support.

Re: CiscoWorks LMS3.0 doesn't know the 2960 PoE type

You need to upgrade to lms 3.0.1 called also 3.0 update december 07

Community Member

Re: CiscoWorks LMS3.0 doesn't know the 2960 PoE type

Thank you. I'll install it on Monday.

Community Member

Re: CiscoWorks LMS3.0 doesn't know the 2960 PoE type

hi,

can you tell me how to update ,i update use cco account ,but it display no avalible to update.

what can i do now

please give me some advise,thank you very much!

460
Views
3
Helpful
6
Replies
CreatePlease to create content