Protocol ==> SSH Selected Protocols with order ==> SSH Execution Result:
RUNNING Primary Login Succeeded / Primary Enable Succeeded CM0061 PRIMARY RUNNING Config fetch SUCCESS for TD-RSDCAppA, no change in configuration.
VLAN CM0151 VLAN RUNNING Config fetch failed for TD-RSDCAppA Cause: Insufficient no. of interactive responses(or timeout) for command: copy const_nvram:vlan.dat tftp:. Action: Check if protocol is supported by device and required device package is installed. Check device credentials. Increase timeout value, if required.
Each time the sync archive runs, it fails with this error. I'm wondering why the potential for credentials being invald since the ssh connection succeeds in this same session. I increased the SNMP timeout value, but is that relavent?
Are you able to do a "copy const_nvram:vlan.dat tftp:" from the device to the CiscoWorks LMS server? If not, ensure that you don't have a firewall that might be preventing the sync archive from completing. If so, get me the informatin below:
Go to RME->Administration->System Preferences->Application Log Level Settings. Select the ArchiveMgmt module and set all submodules to DEBUG level. Click APPLY/SAVE. Run Sync Archive job for the one device:
Run the job immediately and record the job number. ******************** Once the job completes, please send me the following files:
On Solaris: ----------- /var/adm/CSCOpx/files/rme/jobs/archivemgmt/ /var/adm/CSCOpx/log/dcmaservice.log /var/adm/CSCOpx/log/dcmaclient.log
On Windows: -------------- /CSCOpx/files/rme/jobs/archivemgmt/ /CSCOpx/log/dcmaservice.log /CSCOpx/log/dcmaclient.log
Then from one of the devices that is failing, get the "show ver" output. Seeing that this is LMS 3.1, you should really upgrade to LMS 3.2.
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...