Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CiscoWorks Message - Error in communicating with DCA Server.

Anybody run across the error in CiscoWorks that states "Error in communicating with DCA Server"? After looking further into the problem I notice that the RMEdbENGINE failed to start and I cannot start it manually.

I also get an error message stating "ERROR: cmd failed. Server reason: Application DRCserver is not registered. All requests to operate on this application will be ignored." please help!!!!!!

Thanks,

Mark

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: CiscoWorks Message - Error in communicating with DCA Server.

You may need to repeat the steps for the rmeng database.  Delete the NMSROOT/databases/rmeng/rmeng.log if it exists, then run:

C:\progra~1\cscopx\objects\db\win32\dbsrv9 -f C:\progra~1\cscopx\databases\rmeng\rmeng.db
8 REPLIES
Cisco Employee

Re: CiscoWorks Message - Error in communicating with DCA Server.

Post the output of the pdshow command.

New Member

Re: CiscoWorks Message - Error in communicating with DCA Server.

        Pid    = 7284
        RC     = 0
        Signo  = 0
        Start  = 2/8/2010 11:51:43 AM
        Stop   = Not applicable
        Core   = Not applicable
        Info   = DFM server Running

        Process= DeviceDiscovery
        State  = Never started
        Pid    = 0
        RC     = 0
        Signo  = 0
        Start  = N/A
        Stop   = Not applicable
        Core   = Not applicable
        Info   = Not applicable,

        Process= CSRegistryServer
        State  = Running normally
        Pid    = 7292
        RC     = 0
        Signo  = 0
        Start  = 2/8/2010 11:51:43 AM
        Stop   = Not applicable
        Core   = Not applicable
        Info   = CSRegistryServer is running in other process

        Process= CmfDbEngine
        State  = Never started
        Pid    = 0
        RC     = 0
        Signo  = 0
        Start  = N/A
        Stop   = Not applicable
        Core   = Not applicable
        Info   = Not applicable,

        Process= CmfDbMonitor
        State  = Never started
        Pid    = 0
        RC     = 0
        Signo  = 0
        Start  = N/A
        Stop   = Not applicable
        Core   = Not applicable
        Info   = Not applicable,

        Process= DCRServer
        State  = Never started
        Pid    = 0
        RC     = 0
        Signo  = 0
        Start  = N/A
        Stop   = Not applicable
        Core   = Not applicable
        Info   = Not applicable,

        Process= CampusOGSServer
        State  = Never started
        Pid    = 0
        RC     = 0
        Signo  = 0
        Start  = N/A
        Stop   = Not applicable
        Core   = Not applicable
        Info   = Not applicable,

        Process= CMFOGSServer
        State  = Never started
        Pid    = 0
        RC     = 0
        Signo  = 0
        Start  = N/A
        Stop   = Not applicable
        Core   = Not applicable
        Info   = Not applicable,

        Process= ConfigMgmtServer
        State  = Never started
        Pid    = 0
        RC     = 0
        Signo  = 0
        Start  = N/A
        Stop   = Not applicable
        Core   = Not applicable
        Info   = Not applicable,

        Process= EssentialsDM
        State  = Never started
        Pid    = 0
        RC     = 0
        Signo  = 0
        Start  = N/A
        Stop   = Not applicable
        Core   = Not applicable
        Info   = Not applicable,

        Process= NCTemplateMgr
        State  = Never started
        Pid    = 0
        RC     = 0
        Signo  = 0
        Start  = N/A
        Stop   = Not applicable
        Core   = Not applicable
        Info   = Not applicable,

        Process= NetShowMgr
        State  = Never started
        Pid    = 0
        RC     = 0
        Signo  = 0
        Start  = N/A
        Stop   = Not applicable
        Core   = Not applicable
        Info   = Not applicable,

        Process= RMEOGSServer
        State  = Never started
        Pid    = 0
        RC     = 0
        Signo  = 0
        Start  = N/A
        Stop   = Not applicable
        Core   = Not applicable
        Info   = Not applicable,

        Process= TISServer
        State  = Never started
        Pid    = 0
        RC     = 0
        Signo  = 0
        Start  = N/A
        Stop   = Not applicable
        Core   = Not applicable
        Info   = Not applicable,

        Process= DFMOGSServer
        State  = Never started
        Pid    = 0
        RC     = 0
        Signo  = 0
        Start  = N/A
        Stop   = Not applicable
        Core   = Not applicable
        Info   = Not applicable,

        Process= InventoryCollector
        State  = Never started
        Pid    = 0
        RC     = 0
        Signo  = 0
        Start  = N/A
        Stop   = Not applicable
        Core   = Not applicable
        Info   = Not applicable,

        Process= Interactor
        State  = Never started
        Pid    = 0
        RC     = 0
        Signo  = 0
        Start  = N/A
        Stop   = Not applicable
        Core   = Not applicable
        Info   = Not applicable,

        Process= NOSServer
        State  = Never started
        Pid    = 0
        RC     = 0
        Signo  = 0
        Start  = N/A
        Stop   = Not applicable
        Core   = Not applicable
        Info   = Not applicable,

        Process= PTMServer
        State  = Never started
        Pid    = 0
        RC     = 0
        Signo  = 0
        Start  = N/A
        Stop   = Not applicable
        Core   = Not applicable
        Info   = Not applicable,

        Process= EDS-GCF
        State  = Never started
        Pid    = 0
        RC     = 0
        Signo  = 0
        Start  = N/A
        Stop   = Not applicable
        Core   = Not applicable
        Info   = Not applicable,

        Process= jrm
        State  = Never started
        Pid    = 0
        RC     = 0
        Signo  = 0
        Start  = N/A
        Stop   = Not applicable
        Core   = Not applicable
        Info   = Not applicable,

        Process= 1632
        State  = Never started
        Pid    = 0
        RC     = 0
        Signo  = 0
        Start  = N/A
        Stop   = Not applicable
        Core   = Not applicable
        Info   = Not applicable,

        Process= CTMJrmServer
        State  = Never started
        Pid    = 0
        RC     = 0
        Signo  = 0
        Start  = N/A
        Stop   = Not applicable
        Core   = Not applicable
        Info   = Not applicable,

        Process= ChangeAudit
        State  = Never started
        Pid    = 0
        RC     = 0
        Signo  = 0
        Start  = N/A
        Stop   = Not applicable
        Core   = Not applicable
        Info   = Not applicable,

        Process= SyslogAnalyzer
        State  = Never started
        Pid    = 0
        RC     = 0
        Signo  = 0
        Start  = N/A
        Stop   = Not applicable
        Core   = Not applicable
        Info   = Not applicable,

        Process= DataPurge
        State  = Never started
        Pid    = 0
        RC     = 0
        Signo  = 0
        Start  = N/A
        Stop   = Not applicable
        Core   = Not applicable
        Info   = Not applicable,

        Process= ANIDbEngine
        State  = Program started - No mgt msgs received
        Pid    = 7764
        RC     = 0
        Signo  = 0
        Start  = 2/8/2010 11:55:05 AM
        Stop   = Not applicable
        Core   = Not applicable
        Info   = Application started by administrator request.

        Process= ANIServer
        State  = Running with busy flag set
        Pid    = 7832
        RC     = 0
        Signo  = 0
        Start  = 2/8/2010 11:55:09 AM
        Stop   = Not applicable
        Core   = Not applicable
        Info   = ANIServer started.

        Process= UTMajorAcquisition
        State  = Never started
        Pid    = 0
        RC     = 0
        Signo  = 0
        Start  = N/A
        Stop   = Not applicable
        Core   = Not applicable
        Info   = Not applicable,

        Process= AdapterServer
        State  = Program started - No mgt msgs received
        Pid    = 7892
        RC     = 0
        Signo  = 0
        Start  = 2/8/2010 11:55:13 AM
        Stop   = Not applicable
        Core   = Not applicable
        Info   = Server started by admin request

Cisco Employee

Re: CiscoWorks Message - Error in communicating with DCA Server.

Shutdown the Daemon Manager service, then delete NMSROOT/databases/cmf/cmf.log if it exists.  Then run the following command:

NMSROOT/objects/db/win32/dbsrv9 -f NMSROOT/databases/cmf/cmf.db

Then restart the Daemon Manager service, and the daemons should come up.

New Member

Re: CiscoWorks Message - Error in communicating with DCA Server.

So I would run the command like below????

C:\Program Files\CSCOpx\objects\db\win32\dbsrv9 -f C:\Program Files\CSCOpx\databases\cmf\cmf.db

Cisco Employee

Re: CiscoWorks Message - Error in communicating with DCA Server.

C:\Progra~1\CSCOpx\objects\db\win32\dbsrv9 -f C:\Progra~1\CSCOpx\databases\cmf\cmf.db

New Member

Re: CiscoWorks Message - Error in communicating with DCA Server.

I got this message...

The CiscoWorks RME NG database engine service on Local Computer started and then stopped. Some services stop automaitcally if they have no work to do, for example, the Performance Logs and Alerts service.

Cisco Employee

Re: CiscoWorks Message - Error in communicating with DCA Server.

You may need to repeat the steps for the rmeng database.  Delete the NMSROOT/databases/rmeng/rmeng.log if it exists, then run:

C:\progra~1\cscopx\objects\db\win32\dbsrv9 -f C:\progra~1\cscopx\databases\rmeng\rmeng.db
New Member

Re: CiscoWorks Message - Error in communicating with DCA Server.

You my friend are a freaking genious. A million thank yous! Your solution fixed my problem!

Thanks,

Mark

2300
Views
0
Helpful
8
Replies