Re: Ciscoworks question. Trying to report on non 802.1x ports.
This is doable using the Campus Manager User Tracking application. UT will acquire all end hosts connected to your switched and wireless networks. If you run a UT report, and view All Columns, you will see one of the columns called dot1xEnabled. The value of that column will be either true or false. You could also create a custom layout in UT to only show the columns you want.
The downside of this approach is that you will only see ports in UT which have end users connected to them. If you would rather search through your devices' configurations looking for ports without dot1x, you can use the RME baseline compliance feature. Under RME > Config Mgmt > Compliance Mgmt > Template Mgmt, you can create new template which does something like:
Submode : interface [#.*Ethernet.*#]
- dot1x pae both
Or use whatever commands you want to identify whether or not dot1x is configured. Then, if you run a compliance check against your switches, you will those switches and ports which do not have the required commands. This approach isn't really a report, but it will give you an idea of what ports do not have dot1x configured.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.