Facing problem with the syslog collector. No message counters are displaying or increasing in the forward of syslog collector. Able to receive the traps sent from all the devices within the KIWI syslog software which i had temparory installed on LMS server. Kiwi was just used to verify if the traps are reaching the ciscoworks server.I had even done the unsubscribe & subscribing the server in the syslog collector. User casusers has full rights to execute.Recently there was problem with the files of Syslogfirst.log,SyslogSecond.log & Syslogthird.log. I had used the DBSpaceReclaimer utility. The logs are not there for last 6 months.
First, syslog messages are NOT traps. Traps are SNMP messages sent to udp/162. Syslog messages are textual messages sent to udp/514. The crmlog service binds to UDP port 514, and receives syslog messages only.
If you are sending syslog messages from your devices to the LMS server, make sure that Kiwi is shutdown, and make sure the CWCS syslog services (i.e. crmlog) is running. If you run netstat -a -n -o -b, you should see the crmlog.exe process bound to UDP port 514.
Once this has been verified, you should start seeing messages in syslog.log. Once that happens, SyslogCollector will read them, filter them, then pass them up to SyslogAnalyzer. SyslogAnalyzer will write the messages into the RME database.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...