Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

CiscoWorks Syslog

Hi Friends,

I Have L3 switches and windows 2000 server running on the lab network.L3 switch is configured to log to the syslog server but I don't see any messages on ciscoworks syslog analyzer.Device is configured to resource manager essentials.

Can any body help to resolve the problem.

5 REPLIES
Silver

Re: CiscoWorks Syslog

Anything in the syslog.log file?

\CSCOpx\log\syslog.log

What level do you log? critical? informational?

Cheers,

Michel

New Member

Re: CiscoWorks Syslog

In the syslog.log file there is no messages received from the devices.It contains some messages which are related to syslog analyser service. and logging level is configured to informational.

there are no mesage coming from the device to the server

Cisco Employee

Re: CiscoWorks Syslog

If there are no devices in the syslog.log you need to determine if the messages from the device are reaching the server.

Can you do a packet capture on the server to see if its receiving syslog traffic? If not then you'll need to look at the device(s) to see if they are properly configured for logging.

Silver

Re: CiscoWorks Syslog

I assume if ciscoworks sends it's self syslog messages then the syslog services runs fine.

Is there anything in between the server and the lab where the switches are?

Did you do anything on the switches to provoke syslog messages?

New Member

Re: CiscoWorks Syslog

Hi sir,

server is directly connected to the switch and there is no acls configured. I haven't done anything to provoke the syslog messages on the switch.

Thanks

Ravi

122
Views
0
Helpful
5
Replies
CreatePlease to create content