Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Ciscoworks with VPN's and PIX's

I have a customer that has Ciscoworks installed. (Current modules installed are RME, Cisco View, Device Fault Manager, Common Services, Campus Manager)

Can the customer do config pushes to the VPN and PIX devices using what they have installed or do they need something else added to Ciscoworks to do this? Thanks

5 REPLIES
Cisco Employee

Re: Ciscoworks with VPN's and PIX's

The RME piece of the application should handle this config mgmt.

Have a look at the supported devices list as well for minimum code requirements:

http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/cw2000/cw2000e/e_4_x/4_0_3/sdt/rme403.htm#wp231143

New Member

Re: Ciscoworks with VPN's and PIX's

What you need is CiscoWorks VMS (VPN Management Solution) to manage security devices.

I don't think you can do it with CiscoWorks LMS as it is purely for Routers/Switches.

Cheers.

Cisco Employee

Re: Ciscoworks with VPN's and PIX's

VMS (now CSM) does have additional feature to manage security devices, but RME does have config management capabilities for PIX and VPN devices.

New Member

Re: Ciscoworks with VPN's and PIX's

thanks for your highlight. I didn't aware that RME support those devices.

Cheers!

New Member

Re: Ciscoworks with VPN's and PIX's

How would I use RME to do this with the PIx's and vpn's? Thanks

133
Views
15
Helpful
5
Replies