We manage routers outside our our NAT...we have gone thru all the hoops of modifing the "config.properties" file and putting in the NAT'ed address of our server in the device attributes of these routers that lie outside. We are still unable to add their IOS images into the library (even though the configurations get backed-up no problem). Here's the error msg:
Start images uploading from device to library:
Number of images to upload: 1
Uploading image flash:c3640-bin-mz.123-9a.bin of size 8543776 from AP3640 (#1 of 1)
Start time: 16 Dec 2005 12:30:03 EST
Error Info Code: 4159.
Device Error: The copy to/from flash operation failed.
Probable Cause: Flash copy failed with return code of
copyInvalidServerAddress. Recommended Action: Retry the operation. If
the problem persists, contact your technical support representative
Hi, yes...in the config.properties file the default field is in #3...so when we updated the device attributes for all of our routers (that lie outside) in RME...We added the public address of our server into the "field 3" box...we are running RME 3.5 with IDU 10. We have gone back and forth with TAC for weeks on this, getting VERY little response.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...