09-24-2017 08:53 AM - edited 03-01-2019 06:09 PM
Hi Guys,
I have one Cisco PI 2.1 Appliance and have the DVD for PI2.1 software and trying to boot the dvd from appliance but no hope. when I choose boot fronm DVD/CD gave not load and error!
How to solve this issue
Thanks for all
Mohammad
Solved! Go to Solution.
09-25-2017 11:06 AM
But this is for ver. 3 i have 2.1..Is it the same?
09-25-2017 11:55 AM
09-25-2017 01:37 PM
I didn't see ay thing in my server. Even HDDs LED indicator not lighting! I am fraid about this issue!
Do I need to open it and check hardware connections inside!
09-25-2017 01:53 PM
It depends. Do you have an active service contract?
If does, open up a TAC.
Otherwise, take a look on hardware. Don't hurt thought.
09-26-2017 10:25 AM
I opened and changed the SATA slot and worked with me fine!
Thanks
09-26-2017 10:30 AM
That´s great man!
Please, change the status to "Solved" then you can help others with similar issue.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: