Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

CM Network topology map

Is it possible to create an ACS account to permit end users to view only Campus Manager network topology map?

Thanks

3 REPLIES
Cisco Employee

Re: CM Network topology map

Yes, but only in LMS 3.2.  You must first set the following property to true in NMSROOT/campus/etc/cwsi/ANIServer.properties:

Topo.ACSAuthorizedView=true
New Member

Re: CM Network topology map

Thanks Joe.

Are there any doco on how to create an end user account on ACS which will allow the user to access ciscoworks to view only the topology map?

Cisco Employee

Re: CM Network topology map

Besides the LMS user guide, this white paper talks about how to enable ACS integration:

http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps2425/prod_white_paper0900aecd80613f62.html

It's a bit old, but the ACS configuration steps are still the same.

194
Views
0
Helpful
3
Replies
CreatePlease to create content