Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CNA and ASA 5520 not visible

Hi,

we have a problem with CNA (Cisco Network Assistent 5.3) and Cisco ASA 5520 (OS 7.3). Other devices like Switches were detected correctly by CNA, only the ASA not. HTTPS-Access is available and ASDM works friendly too.

Thanks for answers.

3 REPLIES
Cisco Employee

Re: CNA and ASA 5520 not visible

CNA releases do not support the ASA

New Member

Re: CNA and ASA 5520 not visible

Hello,

thats not right, see the below Link:

http://www.cisco.com/en/US/docs/net_mgmt/cisco_network_assistant/version5_0/release/notes/OL12210a.html#wp713345

This ASA devices are supported:

ASA 5505, ASA 5510, ASA 5520, and ASA 5540 Adaptive Security Appliances

Re: CNA and ASA 5520 not visible

Perhaps since the firewalls don't support CDP you need to enter them manually. The user guide reads:

"Beginning with the IP address for a starting device and the port numbers for the HTTPS and HTTP protocols, Network Assistant uses CDP to compile a list of community candidates that are within four CDP hops of the starting device"

http://www.cisco.com/en/US/docs/net_mgmt/cisco_network_assistant/version5_0/quick/guide/English/creatcom.html#wp1053277

Regards

Farrukh

934
Views
0
Helpful
3
Replies