CNA cannot see 4006 switches

[swakelen]

From the data sheets, CNA seems to support all the modules for the 4000 series, and can see our 4503 switches, but not the 4006. Are the 4006 switches supported in CNA? Both types of switch are running 12.2.20EWA.

Thanks in advance

[spremkumar]

hi

As per the datasheets these are the models in Cat 4000 series supported by CNA..

WS-C4948

Cisco Catalyst 4948 Switch

WS-C4503

Cisco Catalyst 4503 Switch

WS-C4506

Cisco Catalyst 4506 Switch

WS-C4507R

Cisco Catalyst 4507R Switch

WS-C4510R

Cisco Catalyst 4510R Switch (10-slot chassis), fan, no power supply; redundant supervisor engine-capable

regds

[swakelen]

As I feared :-(

Thank you for the response