Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CNA cannot see 4006 switches

From the data sheets, CNA seems to support all the modules for the 4000 series, and can see our 4503 switches, but not the 4006. Are the 4006 switches supported in CNA? Both types of switch are running 12.2.20EWA.

Thanks in advance

2 REPLIES

Re: CNA cannot see 4006 switches

hi

As per the datasheets these are the models in Cat 4000 series supported by CNA..

WS-C4948

Cisco Catalyst 4948 Switch

WS-C4503

Cisco Catalyst 4503 Switch

WS-C4506

Cisco Catalyst 4506 Switch

WS-C4507R

Cisco Catalyst 4507R Switch

WS-C4510R

Cisco Catalyst 4510R Switch (10-slot chassis), fan, no power supply; redundant supervisor engine-capable

regds

New Member

Re: CNA cannot see 4006 switches

As I feared :-(

Thank you for the response

119
Views
0
Helpful
2
Replies