I'm trying to deploy a scenario involving a Catalyst 3560G and four Catalyst 2960. All 2960s are connected to the 3560G, but my "commander" needs to be one of the 2960s. When I do this, I can't run a r-command from the commander to any cluster member. In this topology, all other switches (I mean, all cluster members) appear as having 255 hopes. The only situation in which I can access all switches from a single one is when I put my 3560G as the commander. This situation is not acceptable.
Could you please help me to solve this problem? All equipments have CDP enabled.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...