CNA login issue

[shijuuu]

hi,

How can login to tacacs configured devices through CNA.

I tried HTTP authentication it diesnt work

plss help

[Lucien Avramov]

You need to use :  ip http authentication tacacs, as CNA communicates with the switch over HTTP.

Make sure to remove Ip http authentication local

[shijuuu]

hi,

thanks, I managed to login but now real issue is its showing unsupported device.

Switch   Ports  Model              SW Version              SW Image           
------   -----  -----              ----------              ----------         
*    1   26     WS-C3750-24TS      12.2(25)SEE3            C3750-IPSERVICESK9-M
     2   52     WS-C3750-48TS      12.2(25)SEE3            C3750-IPSERVICESK9-M

thanks

[Leo Laohoo]

What version is your CNA?  CNA version 5.0 supports WS-C3750-24TS.

http://www.cisco.com/en/US/docs/net_mgmt/cisco_network_assistant/version5_0/release/notes/OL12210a.html#wp699844

[shijuuu]

hi,

thanks, CNA 5.5...I managed to login now the issue is showing unsupported device.

Switch   Ports  Model              SW Version              SW Image           
------   -----  -----              ----------              ----------         
*    1   26     WS-C3750-24TS      12.2(25)SEE3            C3750-IPSERVICESK9-M
     2   52     WS-C3750-48TS      12.2(25)SEE3            C3750-IPSERVICESK9-M

[jonesk2]

I'm seeing this same issue.  Local authentication works fine but as soon as aaa is enabled the device is 'unsupported' by cna.  I believe it is possibly related to the switch ios version, 12.2(25) as it is working on slightly newer revisions, 12.2(46) for example, on other switches but I'm not able to upgrade anytime soon to test.