Hi, I want to ask you something, I am using the Cisco network Asistant 5.4, and when I conected to a device in this case a router 2800, it show the topology and another things, but the option Monitor>Views>Front panel doesn't show me anything , I read the help menu and this case of router is supported.
Cisco 2800 Series Integrated Services Routers: C2801, C2811, C2821, C2851.
So can you help ? Is there something wrong with the CNA or it's necesarry more configration in the device.
Re: CNA problem with the option View (Front panel)
In Network Assistant, some windows, such as VLAN, Hostname, and so on, might not open from the Front Panel view popup menu for Catalyst 4500 series switches. So ensure whether the 2800 router is to connected 4500 series catalyst switch. If so you may try closing the network assistant and restart it because it may happen It may happen when you work with Front Panel for some time.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...