Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

community string for limited

hi,

I want to limit a particular community string to work ONLY for IFSTATUS mib, and nothing more than that. Please state as to how can i acheive that.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: community string for limited

You can create a view:

snmp-server view ifstatusOnly iso excluded

snmp-server view ifstatusOnly ifAdminStatus.* included

snmp-server view ifstatusOnly ifOperStatus.* included

snmp-server community mycommunity view ifstatusOnly RO

4 REPLIES
Cisco Employee

Re: community string for limited

You mean just ifOperStatus and ifAdminStatus? That is, only allow the polling of these two objects for all ifIndex values?

New Member

Re: community string for limited

yes, as there are some Monitoing softwares in our network(but not in our administrative scope) so i don't want those softwares to poll any thing other than ifOperStatus and ifAdminStatus...

New Member

Re: community string for limited

just want to confirm, will this be possible using

snmp-server community xyz view ifOperStatus

and

snmp-server community xyz view ifAdminStatus

Cisco Employee

Re: community string for limited

You can create a view:

snmp-server view ifstatusOnly iso excluded

snmp-server view ifstatusOnly ifAdminStatus.* included

snmp-server view ifstatusOnly ifOperStatus.* included

snmp-server community mycommunity view ifstatusOnly RO

155
Views
0
Helpful
4
Replies