Please could you help us troubleshoot one issue on our EEM and TCL configuration. We uploaded a script that will send us Interface errors and other stuff but it seems that some background script is monitoring the uploaded script and stop it while processing. Something like security feature. The script was working when it was on a lab but when I loaded the script on our production router, the logs below were generated. I’m not sure if this “system:/lib/tcl/base.tcl” seems to have catch the loaded script. The difference is the platform I used. Specs below. Attached herein is the TCL script.
Production Router Used:
Mar 28 06:36:42.902 UTC: %HA_EM-6-LOG: composite_device_health_interface.tcl: can't read "parent_interface": no such variable
Mar 28 06:36:42.902 UTC: %HA_EM-6-LOG: composite_device_health_interface.tcl: while executing
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...