Compression monitoring via SNMP

[6tschraml]

I'm looking for a MIB that allows me to get the compression ratio that is part of the output of "show compress" ...

show compress

...

Compressed bytes sent: 317862131 bytes 61 Kbits/sec ratio: 12.870

Compressed bytes recv: 221975672 bytes 43 Kbits/sec ratio: 9.194

... via SNMP. I'm talking about a serial interface with HDLC encapsulation and compression actived with the "compress stac" instruction. Any ideas?

Thanks in advance.

Thomas

[b.speltz]

you can check the CISCO-COMPRESSION-SERVICE-ADAPTER-MIB.