Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Config Archive Date in CW RME 4.0.4

How to see Date of each config archive in RME 4.0.4

2 ACCEPTED SOLUTIONS

Accepted Solutions
Cisco Employee

Re: Config Archive Date in CW RME 4.0.4

All configs will be displayed with the following header in the config viewer:

! ! Last configuration change at 08:50:43 EDT Tue Aug 29 2006

! ! NVRAM config last updated at 08:50:42 EDT Tue Aug 29 2006

Additionally, every method for locating a configuration (e.g. Version Tree, Search Archive) will show the configuration's archival date.

Cisco Employee

Re: Config Archive Date in CW RME 4.0.4

That should always show the latest configuration archive. There is a bug which is fixed in the recently posted LMS 2.6 that may prevent that, however. Given that the config viewed from Device Center in the latest revision, you can use the Device Center field:

Configuration Last Archived Time

To determine the date of the configuration in question.

3 REPLIES
Cisco Employee

Re: Config Archive Date in CW RME 4.0.4

All configs will be displayed with the following header in the config viewer:

! ! Last configuration change at 08:50:43 EDT Tue Aug 29 2006

! ! NVRAM config last updated at 08:50:42 EDT Tue Aug 29 2006

Additionally, every method for locating a configuration (e.g. Version Tree, Search Archive) will show the configuration's archival date.

Community Member

Re: Config Archive Date in CW RME 4.0.4

Ok that is Fine. But, when I go to the device Center and select a device then View Config, It shows the configuration without date or header.

Cisco Employee

Re: Config Archive Date in CW RME 4.0.4

That should always show the latest configuration archive. There is a bug which is fixed in the recently posted LMS 2.6 that may prevent that, however. Given that the config viewed from Device Center in the latest revision, you can use the Device Center field:

Configuration Last Archived Time

To determine the date of the configuration in question.

126
Views
0
Helpful
3
Replies
CreatePlease to create content